1975-1980 300 PS

300 PS

Year:
1975-1980

Model:
300 PS

Circuit:
?

Config:
Piggy-back

Control Panel:
Black forward facing w/ white labels

Front Conrol Layout:
In, In, Vol, Treb, Mid, Bass, Presence, Guitar/Bass Sw, 2300 Hz, 1250 Hz, 485 Hz, 235 Hz, 100 Hz, Distortion, Output - Pilot Lamp

Rear Conrol Layout:
Speaker (1/4"), Line Recording (1/4"), Output Tubes Matching, Distortion/Vol Boost Pedal (1/4"), EQ Pedal (1/4"), Hum Balance, Power Sw, Standby Sw, Fuse (8A), Outlet (grounded, polarized), Ground Sw (A/Off/B)

Knobs:
Black skirted w/ chrome center, numbered 1 - 10 (EQ knobs numberd -5 to +5)

Head:
22"w x 10 3/4"h x 13 1/4"d @ bottom (11 1/4"d @ top)

Head Hardware:
Black strap handles x 3, corner protectors, half clover perforated steel top vents and back panel w/ cord holder, Sphinx glides

Cabinet:
Front loaded 4 x 12" Sealed back, 28"w x 30"h x 13"d

Cab Hardware:
2 x black strap handles, corner protectors, casters, Sphinx glides (side mounted)

Head/Cab Covering:
Black Tolex

Head/Cab Grille:
Black acoustic foam w/ white trim (early) or black grille cloth

Logo:
Grille mounted, raised, chrome & black script "Fender®" w/o tail (head and cab)

Weight:
Head: 76 lbs.
Cab: 108 lbs.

Speakers/Load:
Cab: 4 x 12"/8 ohms total (series/parallel wired)

Speaker Model:
Utah 012454

Effects:
Active EQ, Distortion

Output:
300 Watts

Preamp:
2 x 7025

Power:
4 x 6550

Bias:
Fixed Bias

Rectifier:
Solid State

Phase Inverter:
12AX7, 6V6GTA, Transformer

Other:
Active EQ: 12AU7

Comments:
Fender included a wheeled stand for the head at no extra charge.
Later versions have an XLR Line out jack on the far left back panel in addition to the 1/4" Line/Recording jack
Due to lack of space in the head the tube chart is affixed to back of the power transformer
The power transformer alone for the 300 PS weighs in at 23 lbs.

Field Guide - Corrections/Comments

Fender is a registered trademark of the Fender Musical Instruments Corp. Ampwares is in no way affiliated with FMIC.

Year:	1975-1980
Model:	300 PS
Circuit:	?
Config:	Piggy-back
Control Panel:	Black forward facing w/ white labels
Front Conrol Layout:	In, In, Vol, Treb, Mid, Bass, Presence, Guitar/Bass Sw, 2300 Hz, 1250 Hz, 485 Hz, 235 Hz, 100 Hz, Distortion, Output - Pilot Lamp
Rear Conrol Layout:	Speaker (1/4"), Line Recording (1/4"), Output Tubes Matching, Distortion/Vol Boost Pedal (1/4"), EQ Pedal (1/4"), Hum Balance, Power Sw, Standby Sw, Fuse (8A), Outlet (grounded, polarized), Ground Sw (A/Off/B)
Knobs:	Black skirted w/ chrome center, numbered 1 - 10 (EQ knobs numberd -5 to +5)
Head:	22"w x 10 3/4"h x 13 1/4"d @ bottom (11 1/4"d @ top)
Head Hardware:	Black strap handles x 3, corner protectors, half clover perforated steel top vents and back panel w/ cord holder, Sphinx glides
Cabinet:	Front loaded 4 x 12" Sealed back, 28"w x 30"h x 13"d
Cab Hardware:	2 x black strap handles, corner protectors, casters, Sphinx glides (side mounted)
Head/Cab Covering:	Black Tolex
Head/Cab Grille:	Black acoustic foam w/ white trim (early) or black grille cloth
Logo:	Grille mounted, raised, chrome & black script "Fender®" w/o tail (head and cab)
Weight:	Head: 76 lbs. Cab: 108 lbs.
Speakers/Load:	Cab: 4 x 12"/8 ohms total (series/parallel wired)
Speaker Model:	Utah 012454
Effects:	Active EQ, Distortion
Output:	300 Watts
Preamp:	2 x 7025
Power:	4 x 6550
Bias:	Fixed Bias
Rectifier:	Solid State
Phase Inverter:	12AX7, 6V6GTA, Transformer
Other:	Active EQ: 12AU7
Comments:	Fender included a wheeled stand for the head at no extra charge. Later versions have an XLR Line out jack on the far left back panel in addition to the 1/4" Line/Recording jack Due to lack of space in the head the tube chart is affixed to back of the power transformer The power transformer alone for the 300 PS weighs in at 23 lbs.